$45.00

2011-2021 Ford FSP5 SOTF

Key Features:

Not Having To Pullover To Flash A Different Tune, Switching Instantly Between Calibrations.
Stock, Economy, Tow, Heavy Haul, Performance At The Tip Of Your Fingers.
Valet Mode If You Have An Employee Or Teenager So They Can't Adjust Your Tune Settings.
Includes All Items Required For Install.
Will Work On PowerStroke Diesel Engines 2011-2021 6.7L.

Description:

FSP5 Stands For "Ford Switch Performance". FSP5 Gives You The Ability To Switch Between 5 Calibrations With The Purchase Of SOTF (Shift On The Fly).
This Switch Only Works With A Custom Engine Calibration.
Calibrations Not Included.

Includes:

Install Instructions:

**CLICK HERE FOR VIDEO INSTALLATION**

Step 1: Locate The Appropriate Sensor Near The Factory Upper Fuel Filter Housing.
Step 2: Unplug The Sensor And Cut Back Approximately 1.5″ Of The Protective Wire Sheathing.
Step 3: Tap The PowerStroke Shift On The Fly Switch Into The GREEN And GREEN/WHITE Wires (Polarity Does Not Matter).
Step 4: Leave The Sensor Unplugged From The Factory Location, You Can Tape The End Of The Plug If You Want But It Is Not Required.
Step 5: It Is Important To Make Sure That The Proper PowerStroke Shift On The Fly Tuning Profile Is Installed. Without A Switch The ECM Will Default To The Lowest Power Setting (Setting 1).

ATTENTION! Your FSP5 Switch Has One Nut & One Locking Washer. You Will Remove Both The Nut And Locking Washer When Placing It From Behind The Dash. Do Not Use Unnecessary Force When Tightening Them Back On The Switch, Be Gentle.